1. Home
  2. /
  3. Products
  4. /
  5. Speakers
  6. /
  7. Axxess
  8. /
  9. Axxess L1 Speaker

Axxess L1 Speaker


Make An Inquiry

The Axxess loudspeaker membrane is designed in house by Audio Group Denmark’s skilled engineers and developed to achieve maximum stiffness with minimum noise.

  • Share


Axxess L1

The Axxess L1 stand mounted loudspeaker is developed and designed by the Børresen engineering team led by Michael Børresen and accompanied by Flemming Erik Rasmussen. The speaker is developed with the same overall criteria in terms of sound and design philosophy as Børresen loudspeakers.

Axxess L1 Membrane

The Axxess loudspeaker membrane is designed inhouse by our skilled engineers and is developed to achieve maximum stiffness with minimum noise. The Axxess membrane consists of three skins laminated into a single unit: two layers of spread carbon fiber, with a layer of aramid honeycomb spacers in between.

Axxess L1 Magnet System

In the Axxess loudspeaker magnet motor system, we use double copper caps on the pole rings to achieve high flux and low inductance. We have adopted the use of copper caps from the Børresen X-series. The meticulous engineering of our bass midrange ensures that you experience music with exceptional clarity and depth.

The Axxess ribbon tweeter

The membrane in the Axxess ribbon tweeter is in Kapton – which is a very lightweight material. Compared to a dome tweeter it is 25 times lighter and due to the ribbon tweeter principle, the area is two times bigger. Our ribbon tweeter technology ensures a more immersive listening experience, bringing you closer to the music.

Axxess L cabinet

The Axxess L speakers’ cabinet and baffle are made of natural based composite material. This material choice is an important characteristic and is designed to eliminate sonic distortion, allowing you to fully appreciate the music in its purest form.

The Axxess stand

The Axxess L1 speaker stand is like the cabinet also made of natural based composite material. The Axxess L1 stand incorporates both functional and visual elements inspired by both Ansuz, Aavik and Børresen, which has a positive influence on the aesthetic expression, but also on the performance of the speaker.


Speaker whitout stand

H x W x D:43 x 21,5 x 32 cm
H x W x D:16,9 x 8,3 x 12,6 inches
Weight:10,3 kg
22,7 lbs

Whit stand

H x W x D:71 x 29,5 x 39 cm
H x W x D:28 x 11,4 x 15,4 inches
Weight:10,8 kg
23,8 lbs


Frequency response: 50Hz – 22kHz
Sensitivity: 86 dB /1W
Impedence: >6 Ohm
Recommended Amplifier: 50W
1 x Tweeter: Axxess planar ribbon tweeter
1 x Driver: Axxess bass/midrange driver: 4.5 inches
Finish: Black or white painted satin


There are no reviews yet.

Be the first to review “Axxess L1 Speaker”

Your email address will not be published. Required fields are marked *

Blink High End

Make an Inquiry