$3,999.99
Sold Out
The new generation Technics SL-13000G, in silver or black, is the turntable you are looking for.
See below tech specs and description:
In the SL-1300G, the use of a coreless direct-drive motor with no iron core eliminates uneven rotation of the turntable known as cogging. Also, the twin-rotor construction reduces the bearing load while maintaining high torque, and reduces minute vibrations during rotation. Furthermore, the SL 1300G’s motor was redesigned to eliminate subtle vibrations that could affect sound quality. To improve rigidity, the same reinforcement pattern as the Reference Class SL-1000R/SP 10R was used for the coil mounting base.
Unlock a realm of audio precision with the ΔΣ-Drive – a state-of-the-art system harnessing Technics’ expertise in PWM signal processing. In addition to reducing harmonics, the drive suppresses vibrations from the motor for smoother, more accurate rotation, ensuring a rich reproduction of the music.
The turntable has a three-layered construction with a rigidly combined brass and aluminium die-cast platter. With a deadening rubber covering its entire rear surface to eliminate unnecessary resonance, thereby achieving high rigidity and vibration damping. This delivers smooth rotational stability and inertial mass surpassing the SP-10MK2, the direct-drive turntable standard used by broadcast stations worldwide, as well as having more than twice the inertial mass of the SL-1200MK5.
Three-layered Turntable PlatterTwo-layered Cabinet ConstructionHigh-level Balance Adjustment
This technology combines a noise detection device with an error amplifier. It detects residual noise in the power supply and applies an inverse phase current to remove noise components. It removes low frequency noise more effectively than a regulator to ensure a more ideal power supply.
Low-Noise Switching CircuitCurrent Injection Active Noise Cancelling
The tonearm, a crucial component for precise reading, tracks the record’s rotation. Inherited from Technics, it employs a lightweight, rigid aluminum pipe in the traditional static-balance universal S-shape. Featuring a gimbal suspension and high-precision bearing, it achieves high initial-motion sensitivity through manual assembly by skilled Japanese artisans. This meticulous construction ensures accurate tracing of record grooves. Plus, it includes an auxiliary weight, providing flexibility for a variety of pickup cartridges
For the insulators supporting the body, the SL-1300G uses special silicon rubber that ensures high vibration damping characteristics and long-term reliability.
High-Damping Silicon InsulatorsHigh-Quality Terminals
The SL-1300G adopts eco friendly packaging materials to help curtail marine plastics and other environmental problems. The cushioning has been changed from styrene foam to corrugated cardboard, reducing the amount of plastic used by around 70% compared to existing product packaging. We have also taken steps to improve convenience by combining accessories into one box while maintaining the strength of the cushioning to protect against the product’s heavy weight.
More information at Technics webpage.
Technics
Silver, Black
General
Power Supply – AC 110-240 V, 60 Hz Power Consumption – 11 W, Approx. 0.2 W (Standby) Dimensions (W x H x D) – 453 x 173 x 372 mm (17-27/32 × 6-13/16 × 14-21/32 inch) Weight – Approx. 11.5 kg (Approx. 25.35lbs) Accessories -Turntable, Turntable sheet, Dust cover, EP record adaptor, Balance weight, Auxiliary weight, Head shell, Overhang gauge, Screw set for cartridge, PHONO cable, PHONO earth lead, AC power supply cord, Owner’s Manual
Terminals
Audio Output – PHONO (Pin Jack) x 1, EARTH TERMINAL x 1
Tonearm Section
Type – Universal Static Balance Effective Length – 230 mm (9-1/16″) Overhang -15 mm (19/32″) Tracking Error Angle – Within 2° 32′ (at the outer groove of 30 cm record), Within 0° 32′ (at the inner groove of 30 cm record) Offset Angle – 22° Arm-height Adjustment Range – 0 – 6 mm Stylus Pressure Adjustment Range – 0 – 4 g (Direct Reading) Head Shell Weight – Approx. 7.6 g Applicable Cartridge Weight Range – (without auxiliary weight) 5.6 – 12.0 g 14.3 – 20.7 g (including head shell) (with auxiliary weight) 10.0 – 16.4 g 18.7 – 25.1 g (including head shell) Cartridge Mounting Dimension – JIS 12.7 mm (1/2″) interval Head Shell Terminal Lug – 1.2 mmφ 4-pin terminal lug
Turntable Section
Type – Direct Drive Manual Turntable Turntable Speeds – 33-1/3, 45 and 78 r/min Adjust Range – ±8 %, ±16 % Starting Torque – 2.2 kg-cm Build-up Characteristics – 0.7 s. from Standstill to 33-1/3 r/min Wow And Flutter – 0.025 % W.R.M.S. Rumble – 78 dB (IEC 98A weighted) Turntable Platter – Aluminium diecast, Diameter : 332 mm, Weight : Approx. 2.5 kg (5.51 lb) (Including rubber sheet)
© 2026 Blink High End. All Rights Reserved.